Mini Flow Controller Type 1

The Mini Flow Controller is for use with backpacks and DIY projects.

Max 4 amp rated

Dimensions: 50 x 24 x 20mm

Fitting hole for control knob 7mm

Supplied with nut

Control knob acts as an on/off switch and also controls the flow of water.

Please note control knob on actual product may be a different colour to the one shown in the picture.

All cables are labelled

Fitting Instructions

• Red cable on the controller connects to the positive side (+) of the battery along with the positive side of the water pump.
• Black cable on the controller connects to the negative side (-) of the battery.
• Green cable on the controller connects to the negative side (-) of the water pump.

Please ensure amp rating on the pump does not exceed 4 amps.

If amp rating is not displayed on the pump, please use the pump’s watts and voltage to calculate the amps using the following formula:-

Watts divide by volts = amps,

For example, if using a pump which is rated at 48 watts, calculate 48 watts divide by 12 volts = 4 amps. This pump will be compatible.

Some products cannot be shipped to international destinations, please contact us to check availability before placing an order.