Full Cone Nozzles for Softwash application
This version of the DA Applicator fits any water fed pole angle adapter with a 22mm European thread. It comes fitted with a nozzle which produces a full cone spray pattern with uniform distribution. This enables the most efficient use of your chemicals and makes it ideal for applying a softwash treatment.
- Full cone spray pattern with round impact area
- Uniform distribution over a wide range of flow rates
- Low impact
- Fits any water fed pole angle adapter with 22mm European thread
- 8mm push fit for your pole hose to fit too
- End of the applicator has a ¼ inch BSP thread which allows you to fit other nozzles or fan jets as required
- Plastic full cone nozzle (purple ref No 6.5) included – orifice size is 2.4mm and 50 degree spray pattern
- Plastic full cone nozzle (green ref No 10) included – orifice size is 2.8mm and 70 degree spray pattern
- x1 roll of white PTFE Thread Seal Tape 12m x 12mm x 0.75mm included for use when changing the nozzles.
To change the nozzles simply loosen with a 14mm spanner or socket, unscrew the nozzle and install the new one. It is advisable to apply PTFE thread seal tape (included) to prevent leaks and do not overtighten.
To see the DA Applicator is use please have a look at this short video//www.youtube.com/watch?v=G2gKN_RNHjE