HM Digital In-Line Dual TDS Meter - Ready to go kit
Keep an eye on the performance of your water filtration system with the HM Digital DM-2 Inline Dual TDS Meter.
This dual TDS meter allows you to monitor the water both before DI vessel and after giving you a quick and easy way to check how effectively your RO/DI filtration system is working.
Ready-to-Go Installation Kit
We've taken the hassle out of installation by supplying a complete ready-to-install kit. There's no need to order additional fittings, connectors or Jubilee clips separately – everything you need to get it fitted is included.
Simply choose where you want to monitor the water, cut the existing 1/2" pipe and connect the supplied fittings.
Top tip: Soak the end of the water pipe in hot water for a minute or two before fitting it over the 1/2" barb. This softens the pipe and makes it much easier to push fully onto the fitting.
What it does
Features two separate TDS readings, allowing you to check:
- IN: TDS of the water entering your filtration system
- OUT: TDS of the purified water leaving the system
This makes it easy to monitor your RO membrane and filtration performance and spot when something isn't quite right.
The large digital display provides clear readings, while the meter automatically switches off after approximately three minutes without use to help conserve the batteries.
Designed for regular use around water filtration systems, with a durable, water-resistant housing and shielded sensor cables.
Complete kit Includes
- HM Digital Dual Inline TDS Meter
- 2 x Reducers
- 4 x Jubilee Clips
- 4 x 1/2" x 1/2" Tube Barb Connectors
- 2 x AA batteries – fitted and ready to use
So, unlike a meter-only purchase, this kit arrives ready to go straight onto your filtration system.
Installation
Installation is straightforward
- Switch off your water supply.
- Decide where you want to monitor your IN and OUT water.
- Cut the existing 1/2" water pipe at the chosen points.
- Push the supplied barb connectors into the pipe and secure with the Jubilee clips.
- Connect the IN side to your incoming feed water and the OUT side to your purified product water.
- Turn the water supply back on and check for leaks.
- Switch on the meter and you're ready to monitor your TDS.
Please Note
Not available for international shipping. This kit is available for UK delivery only.
| Collect Only Product | No |
|---|
