ABC 12 Volt Pump Controller
The ABC 12 volt digital flow controller has been manufactured in the UK and designed to provide a budget friendly, simple, reliable controller for your water fed pole system. No calibration required and easy to install. Wiring diagram and set up instructions provided.
The ABC controller does feature current limiting to prevent driving the pump too hard and causing damage to the controller, pump or battery. The ABC controller will drive a standard 100 PSI 9 amp rated pump which is common in most water fed pole systems.
The ABC controller features:-
- LED display (0-99) to show the speed/flow of water
- On/off button
- Arrow buttons to adjust flow up or down as required
- Enclosure with 6 flexi gland points so you can choose which side the wires are installed
- Dimensions including 120 x 120 x 60 mm
- 12 month warranty
The controller does not come fitted with wires. We recommend 1mm² tri-rated cable is used and follow the wiring guide provided.
Customer must fit 7.5 AMP inline fuse (also available from DA Components)
It is advisable not to install the controller in close proximity to reels or hoses where water could leak onto the enclosure.
Supply Voltage – 11-14 VDC
Voltmeter Accuracy +/- 100mV
Enclosure Material ABS
Water Resistance IP55
Working Temperature 0-40 Deg C
For more information please click on the link to view a short video of the ABC pump controller:-https://www.youtube.com/watch?v=tWvXfkhsWpo